![Awaiting product image](/wp-content/uploads/2020/11/placeholder-product.jpg)
+44 (0) 20 8405 6789
or email: sales@etscablecomponents.com
TE-Connectivity HVBT 12 A Busbar Insulating Tape – 11-33kV
TE-Connectivity HVBT-12A High Voltage busbar tape is a heat-shrinkable, adhesive coated tape designed to provide insulation enchancement and protection against accidentally induced discharge.
Designed primarily for insulating straight and bent bars where tubing cannot be used, TE-Connectivity HVBT tape combines the integrity of heatshrink tubing with the versatility of a wraparound product.
Once heated, the adhesive lining melts, amalgamating the overlapped layers together and producing a complete lap-to-lap seal. The busbar tape layers fuse together but do not stick to the bus or hardware, thus providing an environmental seal while allowing fast, easy removal.
A single layer of HVBT-12A tape, two-thirds over-lapped, will provide AC voltage withstand (flashover protection) to at least 17.5kV, increasing to 25kV if a second layer is applied.
- Dimensions: 25.0mm wide, 10metres roll length
- Dielectric strength: 130kV/cm min. @ 2 mm
- TE-Connectivity Busbar tape has a continuous temperature limit of -10oC to +70oC.
Manufacturer | Minimum Cable Size | Maximum Cable Sizes | Width | Maximum Voltage | Thickness | Colour | T-E-Connectivity | 185mm2 | 300mm2 | 25.0mm | 11kV | 0.86mm | Red |
Heat-shrinkable TE-Connectivity HVBT 12 A HV busbar insulation tape.